The interface of the Ising model and the Brownian sheet

We study the limit theorem related to the interface of the three-dimensional Ising model. Dobrushin proved that the interface does not fluctuate and becomes rigid for sufficiently large. We define the random fieldX ^L (t, s), 0t, s1, on the interface, and prove that X^L(t, s) converges to the Brownian sheet as L for sufficiently large, whereL denotes the size of the system. This result does not mean that the interface itself converges to the Brownian sheet.     

Momentum transfer in an agitated vessel with off-centred impellers

Momentum transfer was investigated in an unbaffled agitated vessel of inner diameter 0.3 m equipped with different off-centred impellers. The distribution of the shear rate on the tank wall as a function of the impeller type and Reynolds number was studied in the turbulent regime of the Newtonian liquid flow. The dependences of the averaged dimensionless shear rate, friction coefficient, and dissipated energy on the Reynolds number and eccentricity ratio were approximated using four-parameter equations. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Effects of coupling agents on mechanical and morphological behavior of the PP/HDPE blend with two different CaCO3

The main purpose of incorporating fillers, such as calcium carbonate, into blends of polyolefins is to decrease costs and change tensile and impact properties. Structural differences between both components give rise to the formation of large filler agglomerates in the polymer matrix, which influence the mechanical response of the material. Therefore, the coupling agents of the Lica 12 type at various concentrations was used to facilitate the link between filler and matrix (the latter consisting of PP/HDPE 80/20 wt). Filler was added to the PP/HDPE blend at a 30 wt.% concentration. Two types of calcium carbonate (CaCO₃) were used. These have different average sizes (3.0 and 1.8 μm) which were determined by means of laser diffraction techniques. In addition other coupling agents of the titanate type, such as Lica 09, Lica 01, zirconates ZN 12, and a 1:1 mixture of Lica 12 and Lica 01, were used. This study clearly demonstrated that the addition of the coupling agent to CaCO₃ modifies the mechanical properties of the PP/HDPE/CaCO₃ composites. Values of the mechanical properties indicate that due to its characteristics, each coupling agent gives rise to increases in a particular mechanical property. In the case of Lica 01 an increase was verified in Young’s modulus at 0.7 wt.% and in elongation at break at both concentrations (0.3 and 0.7 wt.%), whereas ZN 12 brought about an increase in elongation at break. The 1:1 mixture of Lica 12 and Lica 01 caused impact resistance of the blend of PP/HDPE with CaCO₃ to increase considerably.     

Mercerization of primary wall cellulose and its implication for the conversion of cellulose I→cellulose II

The mercerization of homogenized primary wall cellulose extracted fromsugar beet pulp was investigated by transmission electron microscopy (TEM),X-ray diffraction together with ¹³C CP-MAS NMR, and FT-IR spectroscopy.For samples resulting from acid extraction, mercerization began at 9% NaOH, whereasfor samples purified by alkaline treatment, the mercerization started at 10%NaOH. The change in morphology when going from cellulose I to cellulose II wasspectacular, as all the microfibrillar cellulose morphology disappeared duringthe treatment. This change in morphology was very drastic as soon as the NaOHconcentrations were increased beyond 8 and 9% for the acid and alkalinepreparedsamples, respectively. On the other hand, the conversion was found to be moreprogressive in terms of increasing NaOH concentration when the transformationwas analyzed by X-ray diffraction or spectroscopy. Our observations of themercerization of isolated cellulose microfibrils are consistent with theconceptof cellulose microfibrils made of parallel chains in cellulose I and crystalsofcellulose II consisting of antiparallel chains.     

单层碳纳米管修饰电极上盐酸曲普利啶的电化学行为及其应用研究

应用循环伏安法研究了盐酸曲普利啶在碳纳米管修饰电极上的电化学行为.结果表明:在0.1 mol/L磷酸盐缓冲溶液(pH 6.9)中,盐酸曲普利啶产生一灵敏的氧化峰,其峰电位为0.81 V(vs.Ag/AgCl),峰电流与盐酸曲普利啶在1.0×10-6～1.3×10-4 mol/L浓度范围内呈线性关系,检出限为5.0×10-7mol/L,已用于片剂中盐酸曲普利啶的测定.     

Glass capillary gas chromatography of amino acid enantiomers

Glass capillaries coated with Chirasil-Val, a chirally functionalised polysiloxane, are capable in principle of resolving all protein amino-acid enantiomers in a single run and within a short analysis time, thus allowing for example the quantitative amino acid determination by enantiomer labelling. The elution characteristics of the individual amino acids however are also dependent upon the chemical nature of the capillary wall surface, and a surface pretreatment is found to be necessary if all protein amino acids are to be analysed. Of the various methods of pretreatment tested, etching of borosilicate glass with gaseous HCl followed by deposition of colloidal silicic acid is considered to be the most suitable.     

Influence of mechanical properties of pectin films on charge density and charge density distribution in pectin macromolecule

The hydration and mechanical properties of citrus pectin films were examined in conditions relevant to those in the plant cell wall. The pectins used for this study varied in the degree of esterification (DE) (high or low) and charge distribution on the backbone (random or block). The hydration of the films was controlled in an osmotic pressure experiment using polyethylene glycol solutions (PEG 20000). Hysteresis tests at constant deformation rate (stress vs deformation) were used for investigating the mechanical behaviour of films. Mechanical and hydration properties of pectin films were examined as a function of charge density, charge density distribution and counterion environment—K⁺, Ca²⁺, Mg²⁺. Swelling decreased with increasing counterion concentration. The effect is stronger in the case of Ca²⁺ and Mg²⁺ for low esterified pectins and therefore crosslinks from divalent ions could be assumed. The crosslink effect is confirmed in mechanical experiments where an increase in the film tensile modulus is observed with increasing counterion concentration. It is shown for the first time that in case of highly concentrated pectin solutions Mg²⁺ cations also act as a crosslinker for pectin macromolecules.     

MoS2纳米管包覆单壁碳纳米管束的制备

MoS₂ nanotube coated SWNT (Single wall carbon nanotube) bundles have been successfully prepared by adsorbing (NH₄)₂MoS₄ onto SWNT bundles and subsequent heat treatment under H₂ at 900 ℃ in a tube furnace. The morphologies, structure and composition of the as-prepared sample were investigated by XRD, SEM, HRTEM coupled with EDS. The formation mechanism has also been preliminarily discussed.     

Sensitive Voltammetric Response of p‐Nitroaniline on Single‐Wall Carbon Nanotube‐Ionic Liquid Gel Modified Glassy Carbon Electrodes

An ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexafluorophosphate, BMIMPF₆)‐single‐walled carbon nanotube (SWNT) gel modified glassy carbon electrode (BMIMPF₆‐SWNT/GCE) is fabricated. At it the voltammetric behavior and determination of p‐nitroaniline (PNA) is explored. PNA can exhibit a sensitive cathodic peak at ?0.70 V (vs. SCE) in pH 7.0 phosphate buffer solution on the electrode, resulting from the irreversible reduction of PNA. Under the optimized conditions, the peak current is linear to PNA concentration over the range of 1.0×10^?8–7.0×10^?6 M, and the detection limit is 8.0×10^?9 M. The electrode can be regenerated by successive potential scan in a blank solution for about 5 times and exhibits good reproducibility. Meanwhile, the feasibility to determine other nitroaromatic compounds (NACs) with the modified electrode is also tested. It is found that the NACs studied (i.e., p‐nitroaniline, p‐nitrophenol, o‐nitrophenol, m‐nitrophenol, p‐nitrobenzoic acid, and nitrobenzene) can all cause sensitive cathodic peaks under the conditions, but their peak potentials and peak currents are different to some extent. Their peak currents and concentrations show linear relationships in concentration ranges with about 3 orders of magnitude. The detection limits are 8.0×10^?9 M for p‐nitroaniline, 2.0×10^?9 M for p‐nitrophenol, 5.0×10^?9 M for o‐nitrophenol, 5.0×10^?9 M for m‐nitrophenol, 2.0×10^?8 M for p‐nitrobenzoic acid and 8.0×10^?9 M for nitrobenzene respectively. The BMIMPF₆‐SWNT/GCE is applied to the determination of NACs in lake water.     

单壁碳纳米管的结构修饰

由于单壁碳纳米管具有独特的结构、电学及机械等性能，可望在许多新领域得 到应用，已引起广泛的关注。但由于单壁碳纳米管不溶于水和常见的有机溶剂，极 大地制约了其应用性能的研究。随着单壁碳纳米管制备技术的不断完善，其研究方 向已开始转向结构修饰及应用性能的研究。主要介绍近年来单壁碳纳米管结构修饰 方面的最新发展状况，重点讨论化学功能化及物理吸附。